Quick Answer: What is diamond cut alloy wheel refurbishment?

Diamond-cut is a type of alloy wheel finish that uses a special CNC wheel lathe to remove part or whole of the painted surface on a wheel. You get a shiny alloy finish as the final effect. This is then treated with a lacquer to avoid any corrosion in the future.

Is it worth refurbishing diamond cut alloys?

Diamond cut wheels can only be refurbished a number of times as too much alloy would eventually be removed. You may wish to consider our powder coat refurbishment as a durable and long lasting refurbishment method instead.

Can you refurbish diamond cut wheels?

Diamond-Cut alloys cannot be repaired at home, as they require a lathe to be refurbished. Diamond-Cut alloys are first removed from the vehicle and are repaired using a lathe. The lathe removes old layers of lacquer and paint, this provides a smooth surface for repairs.

What is diamond cut alloy wheel?

The initial process of making a diamond cut alloy wheel is the same as any rim. But during the finishing process, the alloys are machine lathe that engraves tiny grooves that give rise to a high shine finish. Also, after the machining process, the unfinished wheel is lacquered to prevent oxidation.

IT IS INTERESTING:  Can diamonds develop inclusions over time?

Are diamond cut alloys better?

The powder-coated alloy wheels have been shown to give wheels a more durable finish whereas the diamond cut wheels have been found to have a high shine appearance that is commonly utilized by reputable brands to showcase their high-end models. …

How many times can you refurb diamond cut alloys?

Generally speaking, you can repair or recut your alloy wheels 1 to 2 times. However, the technician working on your alloy wheels will be able to advise you accordingly.

What is the difference between powder coating and diamond cut?

The key difference between a diamond cut alloy wheel and a powder coated alloy wheel is that powder coating doesn’t need a solvent. The powder coating is applied electrostatically by using state-of-the-art powder coating equipment and cured using heat to allow it to create a durable layer.

Is it worth getting alloys refurbished?

We’re often asked the question, “is it worth getting my alloys refurbed?” and in short, our answer will always be yes. Whether it’s down to damage or you’re trying to increase or retain the value of your car, we’d always recommend getting your alloys repaired or refurbed sooner rather than later.

Can you spray diamond cut alloys?

Diamond Cut wheels are first painted in the selected colour and then baked in an oven. … The wheels are then sprayed with an Acrylic Lacquer to finish the look. Although lacquered the diamond cut finish can be susceptible to damage.

What is the difference between diamond and alloy cuts?

a traditional alloy wheel is painted completely by powder coating or a wet spray technique often one colour, the wheels are painted to stop weather corrosion. Diamond cut alloy wheels, will have a part polished metal face with a layer of lacquer over the top for protection.

IT IS INTERESTING:  Where did the narrator meet the mysterious man in the chapter The diamond maker?

How do you look after Diamond cut alloys?

They should be cleaned with a mild shampoo. Do not use acid or alkaline-based wheel cleaners – this will help to avoid any discolouration of the wheel. Diamond cut wheels also generally have pretty harsh edges so it’s best to use an air blower (if you have one), rather than cloths.

How do you stop diamond cut alloys from corroding?

The safest way to extend the life of your diamond cut wheels is to clean them with a pH neutral wheel cleaner. Avoid cleaning with acid or alkaline based wheel cleaners as these can often cause discolouration or corrosion when used excessively.

Are BMW alloys diamond cut?

Which manufacturers use Diamond Cut alloys? It can always be assumed that ‘prestige’ manufacturers such as Mercedes Benz, Audi and BMW are the manufacturers that always use Diamond Cut alloys on their new cars.

What is diamond cut finish?

Diamond cut literally only means that the jeweler has cut small notches into the metal links. These small cuts are then given a high polish to increase their sparkling reflections. For example: Undefined Jewelry Diamond Cut Chain Bracelet. $380.

How many times can you diamond cut a wheel?

Diamond cutting alloys can be performed more than once

Sometimes, wheels can be cut twice or even three times if need be, whereas other wheels should never be exposed to the process of diamond cutting after going through it once.